湖南方运重工科技有限公司 HUNAN FAE HEAVY INDUSTRIES CO.,LTD. TOGETHER WE FORGE AHEAD
FAR150MR HIH - Technical Data
IMPACTING HAMMER(Optional)
RAM Weight tons 3
Minimum Stroke mm 200
Maximum Stroke mm 1000
Maximum Potential Energy ton 3.6
Blow Rate at maximum stroke bpm 42
Operating Pressure bar 180
Required Flow Rate Ipm 170
Height of Hammer mm 1060
Width of Hammer mm 900
Length of Hammer mm 4020
Hammer weight kg 4500
Drive Cap kg 1000
Suitable Power Pack Optional
MAST
Mast raking forward ° 5
Mast side forward ° ±5
Mast raking backforward ° 15
UNDERCARRIAGE(CAT323D)
Crawlers Length mm 4910
Crawlers Width mm 3000-4300
DIESEL ENGINE(CAT C6.4)
Rated power kW (HP) 110(150hp)
HYDRAULIC PUMPS
Main pumps mpa 35
Auxiliary pumps mpa 4
MAIN WINCH
1st Layer nominal line pull kN 200
1st Layer nominal rope speed m/min 70
Rope diameter mm 28
SERVICE WINCH
1st Layer nominal line pull Kn 76
1st Layer nominal rope speed m/min 70
Rope diameter mm 20
WINCH CROWD
Crowd force(pull down/pull up) kN 150/160
Pull down stroke mm 12000
DIMENSION&WEIGHT
Transport width mm 3000
Transport height mm 3021
Transport length mm 13135
Weight ton 39
Min working radius mm 4060

SERIESHIH

FOUNDATION TECHNOLOGIES